Carbide-Based Polyvinyl Chloride Resin PVC Resin Sg5 K67

• CAS No.: 9002-86-2
• Formula: [-CH2-Chcl-]N
• EINECS: 618-338-8
• Molecular Principal Chain: Carbon Chain Polymer
• Color: White
• Product Name: PVC Resin
• Model NO.: SG5
• Type: Sg3 Sg5 Sg8
• Appearance: White Powder
• Grade: Top Grade
• Application: PVC Pipe, Fittings, Films, Plastic Materials
• Market: India, Middle East, South Asia, America, etc
• Expiry Time: Two Years
• Sample: Free Sample
• Certificate: ISO, SGS
• PVC Resin K-Value: 66-68
• PVC Resin Viscosity: 118-107
• PVC Resin Whiteness % ≥: 78
• PVC Resin Volatiles Content % ≤: 0.4
• PVC Resin Appearing Density G/Ml ≥: 0.42
• Average Polymerization: 1100-1000
• Transport Package: 25kgs PP Bag or Kraft Paper Bag
• Specification: SG5 k67
• Trademark: kelai chem
• Origin: China Mainland
• HS Code: 3904109001
• Production Capacity: 3000mt Per Month

Product Description

Carbide-Based Polyvinyl Chloride Resin PVC Resin Sg5 K67


1. Product Description:

 

PVC resin is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , good electrical insulation , thermoplasticity and membrane forming capacity.
The PVC Resins are polymerized by suspension process, their appearance being in white powder form. 
They are essential materials for preparing PVC compounds. By adding blending agents and employing different techniques, they can be made into rigid or non-rigid PVC products and are suppliable in a wide range of transparent, translucent, and opaque colours.


2. Specification:

Our PVC Resins are distinguished for their insulating, moisture-proof, oil-resistant, acid-resistant, and alkali-resitant properties.
 

Tape:	SG1	SG2	SG3	SG4	SG5	SG6	SG7	SG8
K value	77-75	74-73	72-71	70-69	68-66	65-63	62-60	59-55
Viscosity, ml/g	156-144	143-136	135-127	126-119	118-107	106-96	95-87	86-73
Average polymerization			1350-1250	1250-1150	1100-1000	950-850	950-850	750-650
Number of impurity particle≤	30	30	30	30	30	30	40	40
Volatiles content %,≤	0.40	0.40	0.40	0.40	0.40	0.40	0.40	0.40
Appearing density g/ml≥	0.42	0.42	0.42	0.42	0.42	0.45	0.45	0.45
Residual  after sieve     0.25mm mesh≤	2.0	2.0	2.0	2.0	2.0	2.0	2.0	2.0
0.063mm l≥	90	90	90	90	90	90	90	90
Number of grain/400cm2≤	40	40	40	40	40	40	40	40
Plasticizer absorbency value of 100g resin	25	25	25	22	19	16	14	14
Whiteness %,≥	74	74	74	74	74	74	70	70
Residual chlore thylene content mg/kg≤	5	5	5	5	5	5	5	5
Ethylidene chloride mg/kg≤	150	150	150	150	150	150	150	150

3, Packing & Loading & factory pic.

25kgs pp or kraft paper bag, 17MT per 1*20FCL; 25MT per 1*20FCL


4, Application
 

PVC resin - SG3 K-Value 72-71, Average degree of polymerization 1350-1250

PVC resin - SG4 K-Value 70-69, Average degree of polymerization 1250-1150  

PVC resin - SG5 K-Value 68-66, Average degree of polymerization 1100-1000   

PVC resin - SG6 K-Value 65-63,  Average degree of polymerization 950-850

PVC resin - SG7 K-Value 62-60, Average degree of polymerization 850-750  

PVC resin - SG8 K-Value 59-55,  Average degree of polymerization 750-650

SG-1 is used in producing high-grade electrical insulating material 
SG-2 is used in producing electrical insulating material, common soft products and film 
SG-3 is used in producing electrical insulating materials, agricultural film, daily-use plastic products, 
SG-4 is used in producing membranelle for industrial and civil use, tube and pipes 
SG-5 is used in producing transparent products section bar, hard tube and decorative materials 
SG-6 is used in producing clear foil, hard board and welding rod 
SG-7, SG-8 is used in producing clear foil, hard injection molding.

5. Factory Pic.

6. Our service:
1. All inquiries will be replied within 12 hours.
2. Dedication to quality, supply & service.
3. Strictly on selecting raw materials.
4. Sample is available for your evaluation & formulation development.
5.Faster delivery.